Is there a rule for mixing different size panels to connect to an mppt charge controller? I have a set of 24V panels. (6) are 320 watt and (2) is 370watt.

I'm curious if I can use both a pwm and a mppt controller on a single battery bank at the same time.

Morning all, I have an MPPT charge controller rated for 40A, and can take an input of 12 or 24v, and output 12 or 24v.

I have installed two 5kva MPPT inverters, each with separate battery bank and separate front end load of appliances. The only thing shared between both is PV input which is a 96 volt 6000 Watts array.

If I were to have a system with solar-panels, MPPT charge-controller, invertor, battery-bank, load; and a year later I wanted to combine more solar-panels.

I'm wondering if there are any issues I should be aware of when connecting two MPPT controllers to one battery bank. I currently have Kyocrea KC130 panels wired in series (24vdc) handled by an Outback …

OK, I'm looking at using something like the MorningStar TS-60 MPPT controller in my RV to charge my coach batteries from 2 - 300W panels. (~600 Total) I currently have a pair of 170AHr 12V batteries …

I am interested in analyzing the performance of the system after adding MPPT charge controller. can any one help me how can i performance this task with above mentioned experimental setup?

Trying to understand how to best/properly determine the correct cable/wire size to use between two 440 Watt Solar Panels and an MPPT Charge Controller. The distance between the panels and the …

Yes, the GF fuse was removed from the new MPPT 60 so there's only one and it tests good and I've tried swapping it between the two MPPT60s. I've completely disconnected the PV lines into the …